Vskills has developed a new strategic framework for Skill Development for early school leavers and existing workers, especially in the unorganized sector to improve their employability called Trade Employable Skills (TES).

Trade Employable Skills does effective assessment and certification of candidates in different trade disciplines like Electrical, Electronics, Agriculture, Chemical, Automobile, IT, etc to make them job ready.

Why should one take this certification?

To demonstrate clear understanding and practical aspects and to get a visible recognition for this knowledge.

Table of Content

https://www.vskills.in/certification/Vskills-Certified-Plastic-Plant-Fitting-and-Measurement-Table-of-Content

Practice Test

https://www.vskills.in/test/

Companies that hire Plastic Plant Fitting and Measurement Technician

All small and medium companies need certified employees who have the requisite skills. There are more jobs opening up in the economy on a regular basis with the fast growth of the country.

Apply for Certification

By Net banking / Credit Card/Debit Card

We accept Visa/Master/Amex cards and all Indian Banks Debit Cards. There is no need to fill application form in case you are paying online.

Please click buy now to proceed for online payments.

  • Visa Card
  • Master Card
  • American Express
TABLE OF CONTENT

Health Hazards and First Aid

  • HEALTH HAZARDS
  • Prevention Method
  • Eye Protection – Prevention of Eye Injury
  • Skin care
  • FIRST AID
  • Protective Clothing
  • Helmets and Protective Hats
  • Respiratory masks
  • Graphical Symbols for Piping and Plant
  • Scope
  • Heat Transfer Equipment
  • Vessels and Thanks
  • Pumps and Compressors
  • Solids Handling
  • Drying
  • Materials handing
  • Prime movers

Conventional and non – conventional Energy source

  • Conventional energy
  • Non – Conventional Energy or Renewable Energy
  • Pollution
  • Pollutant
  • Classification of pollutants
  • Types of pollution

Fire Prevention and Fire Fighting Equipments

  • Fire classification
  • Fire Extinguisher
  • Types of Extinguishing Agents

Introduction to metrology

  • Metrology
  • Objective of metrology
  • Terminology used in metrology
  • SI types of measurement

Selection of instrument

  • Care ,use and maintenance of the instruments
  • Outside Micrometers
  • Frame
  • Barrel/sleeve
  • Thimble
  • Spindle
  • Anvil
  • Spindle lock-nut
  • Graduations of metric outside micrometer
  • Reading dimensions with outside micrometers
  • Reading micrometer measurements
  • Inside Micrometer – METRIC
  • Measuring the size of a bore or hole
  • Measuring the distance between internal parallel surface
  • Three –Point internal micrometer
  • Depth Micrometers
  • Constructional features
  • Graduation and least count
  • Uses of depth micrometer
  • Combination set
  • Square head
  • Centre head
  • Protector head
  • Vernier calipers
  • Fixed jaws
  • Movable jaws
  • Vernier slide
  • Beam
  • Depth bar
  • Thumb lever
  • Vernier scale
  • Main scale
  • Graduations and reading of vernier calipers
  • Vernier calipers
  • Vernier Principle
  • Determining the least count of vernier calipers
  • Reading vernier measurements
  • Vernier micrometer graduation and reading
  • Vernier micrometer
  • Construction and graduation
  • Vernier height Gauge
  • Specific uses of vernier height gauge
  • Parts of vernier height gauge and their functions
  • Deal test indicators
  • Principle of working
  • Types important features of dial test indicators

Safety Fitting and Measurement

  • What is an accident?
  • Causes for accidents
  • Safety attitudes
  • Responsibilities
  • Rules and procedure at work
  • Safety signs
  • Prohibition signs
  • Mandatory signs
  • Warning signs
  • Information signs
  • Question about your safety
  • Safety Practice – Fire extinguishers
  • EXTINGUISHING OF FIRE
  • Types of fire extinguishers

 

Elements of a File

  • Parts of a file
  • Shapes of files
  • Common files of file
  • Pinning of files
  • Major parts of a hammer
  • Application of hammer
  • Specification

Types of making punches

  • Centre punch
  • Prick punch
  • Try square
  • Marking Media
  • Different Marking Media

Jenny Calipers

  • Dividers
  • Surface plates
  • Surface plates
  • Materials and construction
  • Classification and uses
  • Specifications
  • Marking off tables
  • Surface gauges
  • Fixed type
  • Angle plates
  • Constructional features
  • TYPES OF ANGLE PLATE
  • Grades
  • Angular measuring instruments (semi-precision)
  • Bevel gauges
  • Universal bevel gauges
  • Bevel protractor
  • Vernier bevel protractor
  • PARTS
  • Used of a vernier bevel protractor
  • Graduations on universal bevel protractor
  • The main scale graduations
  • The least count of the vernier bevel protector
  • Reading of universal bevel protector
  • For reading acute set up
  • For obtuse angle set up

Hacksaw frame and blade

  • Hacksaw frame
  • Solid frame
  • Adjustable frame
  • Parts of a hacksaw frame
  • Parts of a hacksaw blade
  • All-hard blade
  • Flexible blade
  • Pitch of the blade
  • Staggered set
  • Wave set
  • Selection of blade
  • Pitch selection
  • Bench vice
  • Types of vices

Drill (parts and functions)

  • Point
  • Shank
  • Tang
  • Body
  • Flutes
  • Land/margin
  • Body clearance
  • Web

Drill Angles

  • Angles
  • Point Angle/Cutting Angle
  • Helix Angle
  • Rake Angle
  • Clearance Angle
  • Chisel Edge Angle/Web Angle
  • Designation of drills
  •  Drilling defects and causes
  • Oversized holes
  • Overheated drills
  • Rough holes
  • Unequal flow of chips
  • Broken drill or split web
  • Chisel
  • Parts of chisel
  • Angles of chisel
  • Point angles and materials
  • Rake angle
  • Clearance angle
  • Radius gauges

Countersinking

  • Angle for countersinking
  • Countersink hole sizes
  • Counter bores sizes and specification
  • Spot facing

Reamers

  • Classification of reamers
  • Parts of a hand reamer
  • Hole size for reaming
  • Calculating drill size for rammer
  • The pillar drilling machine

Drill-holding devices

  • Drill chuck
  • Work holding device
  • The machine vice
  • Cutting speed and rpm
  • Feed in drilling

The Indian standard system of limits and fits –terminology

  • Basic size
  • Actual size
  • Limits of size
  • Maximum limit of size
  • Minimum limit of size
  • Hole
  • Shaft
  • Deviation
  • Upper division
  • Lower deviation
  • Actual deviation
  • Zero line
  • Fundamental deviation
  • Tolerance size

Fits and their classification as per the Indian standard

  • Fit
  • Clearance
  • Maximum clearance
  • Minimum clearance
  • Interference
  • Maximum interference
  • Transition fit
  • Hole basis system
  • Shaft basis system
“Exam scheduling to be done through user account” / “Exam once scheduled cannot be cancelled”
Date of Examination
07-Oct-2017
08-Oct-2017
21-Oct-2017
22-Oct-2017
05-Nov-2017
18-Nov-2017
02-Dec-2017
03-Dec-2017
16-Dec-2017
17-Dec-2017
Examination Time
01:00 PM - 02:00 PM
02:30 PM - 03:30 PM
04:00 PM - 05:00 PM
05:30 PM - 06:30 PM
10:00 AM - 11:00 AM
11:30 AM - 12:30 PM

Write a review


Your Name


Your Review Note: HTML is not translated!

Rating Bad           Good

Captcha

Write a review

Note: HTML is not translated!
    Bad           Good


Captcha

Tags: plastic fitting, plastic plant, technician, repair