Receiving Form Data
 


Form submission method

The method attribute of the FORM element specifies the HTTP method used to send the form to the processing agent. This attribute may take two values:

  • get: With the HTTP "get" method, the form data set is appended to the URI specified by the action attribute (with a question-mark ("?") as separator) and this new URI is sent to the processing agent.
  • post: With the HTTP "post" method, the form data set is included in the body of the form and sent to the processing agent.

The "get" method should be used when the form is idempotent (i.e., causes no side-effects). Many database searches have no visible side-effects and make ideal applications for the "get" method.

If the service associated with the processing of a form causes side effects (for example, if the form modifies a database or subscription to a service), the "post" method should be used.

 

In HTML, one can specify two different submission methods for a form. The method is specified inside a FORMelement, using the METHODattribute. The difference between

METHOD="GET"(the default) and METHOD="POST"is primarily defined in terms of form data encoding. The official recommendations say that "GET"should be used if and only if the form processing is idempotent, which typically means a pure query form. Generally it is advisable to do so. There are, however, problems related to long URLs and non-ASCII character repertoires which can make it necessary to use "POST"even for idempotent processing.

 

In HTML, one can specify two different submission methods for a form. The method is specified inside a FORMelement, using the METHODattribute. The difference between METHOD="GET"(the default) and METHOD="POST"is primarily defined in terms of form data encoding. The official recommendations say that "GET"should be used if and only if the form processing is idempotent, which typically means a pure query form. Generally it is advisable to do so. There are, however, problems related to long URLs and non-ASCII character repertoires which can make it necessary to use "POST"even for idempotent processing.

Content:

The fundamental differences between "GET"and "POST"

The HTML specifications technically define the difference between "GET"and "POST"so that former means that form data is to be encoded (by a browser) into a URL while the latter means that the form data is to appear within a message body. But the specifications also give the usage recommendation that the "GET"method should be used when the form processing is "idempotent", and in those cases only. As a simplification, we might say that "GET"is basically for just getting (retrieving) data whereas "POST"may involve anything, like storing or updating data, or ordering a product, or sending E-mail.

The HTML 2.0 specification says, in section Form Submission (and the HTML 4.0 specification repeats this with minor stylistic changes):

If the processing of a form is idempotent (i.e. it has no lasting observable effect on the state of the world), then the form method should be GET. Many database searches have no visible side-effects and make ideal applications of query forms.

- -

If the service associated with the processing of a form has side effects (for example, modification of a database or subscription to a service), the method should be POST.

In the HTTP specifications (specifically RFC 2616) the word idempotent is defined as follows:

Methods can also have the property of "idempotence" in that (aside from error or expiration issues) the side-effects of N > 0 identical requests is the same as for a single request.

The word idempotent, as used in this context in the specifications, is (pseudo)mathematical jargon (see definition of "idempotent" in FOLDOC) and should not be taken too seriously or literally here. The phrase "no lasting observable effect on the state of the world" isn't of course very exact either, and isn't really the same thing. Idempotent processing, as defined above, does not exclude fundamental changes, only that processing the same data twice has the same effect as processing it once. But here, in fact, idempotent processing means that a form submission causes no changes anywhere except on the user's screen (or, more generally speaking, in the user agent's state). Thus, it is basically for retrieving data. If such a form is resubmitted, it might get different data (if the data had been changed meanwhile), but the submission would not cause any update of data or other events. The concept of changes should not be taken too pedantically; for instance, it can hardly be regarded as a change that a form submission is logged into the server's log file. On the other hand, sending E-mail should normally be regarded as "an effect on the state of the world".

The HTTP specifications aren't crystal clear on this, and section Safe Methods in the HTTP/1.1 specification describes the principles in yet another way. It opens a different perspective by says that users "cannot be held accountable" for side effects, which presumably means any effect than mere retrieval:

In particular, the convention has been established that the GET and HEAD methods SHOULD NOT have the significance of taking an action other than retrieval. These methods ought to be considered "safe". This allows user agents to represent other methods, such as POST, PUT and DELETE, in a special way, so that the user is made aware of the fact that a possibly unsafe action is being requested.

Naturally, it is not possible to ensure that the server does not generate side-effects as a result of performing a GET request; in fact, some dynamic resources consider that a feature. The important distinction here is that the user did not request the side-effects, so therefore cannot be held accountable for them.

The concept and its background is explained in section Allowing input in Tim Berners-Lee's Style Guide for online hypertext. It refers, for more information, to User agent watch points, which emphatically says that GETshould be used if and only if there are no side effects. But this line of thought, however logical, is not always practical at present, as we shall see.

See also answer to question "What is the difference between GET and POST?" in CGI Programming FAQ by Nick Kew.

Why the distinction matters

In the same context where the pragmatic difference is stated, the HTML 2.0 specification describes the corresponding submission methods technically. However, it does not explain why those methods are recommended for idempotent vs. non-idempotent submissions. Neither does it explain what practical difference there might be between the methods.

Alan Flavell has explained, in an article in a thread titled Limit on URL length in the newsgroup comp.infosystems.www.authoring.html, that "the distinction [between GETand POST] is a real one, and has been observed by some browser makers, which can result in undesirable consequences if the inappropriate one is used". He gives the following reason for conforming to the advice:

When users revisit a page that resulted from a form submission, they might be presented with the page from their history stack (which they had probably intended), or they might be told that the page has now expired. Typical user response to the latter is to hit Reload.

This is harmless if the request is idempotent, which the form author signals to the browser by specifying the GETmethod.

Browsers typically will (indeed "should") caution their users if they are about to resubmit a POSTrequest, in the belief that this is going to cause a further "permanent change in the state of the universe", e.g. ordering another Mercedes-Benz against their credit card or whatever. If users get so accustomed to this happening when they try to reload a harmless idempotent request, then sooner or later it's going to bite them when they casually [OK] the request and do, indeed, order a second pizza, or invalidate their previous competition entry by apparently trying to enter twice, or whatever.

Thus, some browsers can act more cleverly if the author uses "GET"or "POST"consistently, i.e. using "GET"for pure queries and "POST"for other form submissions. It needs to be noted, though, that using "GET"gives no protection against causing changes. A script which processes a form submission sent with the "GET"could cause a pizza ordering. It's just that authors are expected to take care that such things don't happen.

Moreover, the use of "POST"cannot guarantee that the user does not inadvertantly submit the same form data twice; the browser might not give a warning, or the user might fail to understand the warning. Users are known to become impatient when it seems that "nothing happens" when they click on a button, so they might click on it again and again. Thus, robust processing of forms should take precautions against unintended duplicate actions. (As a simple example, a submission might be processed first by a script which sends back a page containing a confirmation request, echoing back the data submitted and asking the user to verify it and then submit the confirmation.)

A "GET"request is often cacheable, whereas a "POST"request can hardly be. For query systems this may have a considerable efficiency impact, especially if the query strings are simple, since caches might serve the most frequent queries. For information about caches, see Caching Tutorial for Web Authors and Webmasters, especially section Writing Cache-Aware Scripts.

Differences in form submission

For both METHOD="GET"and METHOD="POST", the processing of a user's submit request (such as clicking on a submit button) in a browser begins with a construction of the form data set, which is then encoded in a manner which depends on the ENCTYPEattribute. That attribute has two possible values mentioned in the specifications, but multipart/form-datais for "POST"submissions only, whereas application/x-www-form-urlencoded(the default) can be used both for "POST"and for "GET".

Then the form data set is transmitted as follows (quotation from the HTML 4.0 specification):

  • If the method is "get"- -, the user agent takes the value of action, appends a ?to it, then appends the form data set, encoded using the application/x-www-form-urlencodedcontent type. The user agent then traverses the link to this URI. In this scenario, form data are restricted to ASCII codes.
  • If the method is "post"--, the user agent conducts an HTTP posttransaction using the value of the action attribute and a message created according to the content type specified by the enctype attribute.

Thus, for METHOD="GET"the form data is encoded into a URL (or, speaking more generally, into a URI). This means that an equivalent to a form submission can be achieved by following a normal link referring to a suitable URL; see the document Choices in HTML forms for details and examples. On a typical browser, the user sees the URL of a document somewhere (e.g. on Location line), and if he is viewing the results of a query sent using METHOD="GET", he will see what the actual query was (i.e. the part of the URL that follows the ?sign). The user could then bookmark it or cut&paste it for later use (e.g. to be E-mailed or put into one's own HTML document after some editing).

Although the HTML specifications don't say it very explicitly, the fundamental difference between the methods is really that they correspond to different HTTP requests, as defined in the HTTP specifications. See especially Method Definitions in RFC 2616. For form submission with METHOD="GET", the browser constructs a URL as described above, then processes it as if following a link (or as if the user had typed the URL directly). The browser divides the URL into parts and recognizes a host, then sends to that host a GETrequest with the rest of the URL as argument. The server takes it from there. Submission of a form with METHOD="POST"causes a POSTrequest to be sent.

Differences in server-side processing

In principle, processing of a submitted form data depends on whether it is sent with METHOD="GET"or METHOD="POST". Since the data is encoded in different ways, different decoding mechanisms are needed. Thus, generally speaking, changing the METHODmay necessitate a change in the script which processes the submission. For example, when using the CGI interface, the script receives the data in an environment variable when METHOD="GET"is used but in the standard input stream (stdin) when METHOD="POST"is used.

It is, however, possible to construct libraries of subroutines (e.g. Perl functions) which allow one to write scripts in a manner which works both for METHOD="GET"and METHOD="POST". This would be based on distinguishing between the cases within the subroutine code and returning the data to the caller in a uniform manner.

Possible reasons to use "POST"for idempotent queries

For reasons explained above, one should normally use METHOD="POST"if and only if the form submission may cause changes. There are some exceptional situations where one may consider using METHOD="POST"even for pure queries, too:

  • If the form data would contain non-ASCII characters, then METHOD="GET"is inapplicable in principle, although it may work in practice (mainly for ISO Latin 1 characters). Thus, for a query where the keywords might contain e.g. accented letters, you have to select among two evils: using METHOD="GET"against the rules which restrict the character reportoire to ASCII within it, or using METHOD="POST"against the rules which says that it should not be used when the processing is idempotent. The latter alternative is probably less dangerous.
  • If the form data set is large - say, hundreds of characters - then METHOD="GET"may cause practical problems with implementations which cannot handle that long URLs. Such usage is mentioned in the the HTML 2.0 specification in an informative note as follows:
    Note - The URL encoding may result in very long URIs, which cause some historical HTTP server implementations to exhibit defective behavior. As a result, some HTML forms are written using METHOD=POSTeven though the form submission has no side-effects.
    The limitations are not only historical. There is an official statement by Microsoft, originally published 2000-02-23: INFO: Maximum URL Length Is 2,083 Characters in Internet Explorer (Q208427).
  • You might wish to avoid METHOD="GET"in order to make it less visible to users how the form works, especially in order to make "hidden" fields (INPUT TYPE="HIDDEN") more hidden. Using POSTimplies that users won't see the form data in the URL shown by the user; but note that this is not a very effective method of hiding, since the user can of course view the source code of your FORMelement!

 

 

POST data is submitted by a form and "posted" to the web server as form data. POST data is encoded the same way as GET data, but isn't typically visible to the user in standard browsers.

Most forms use the post method because it "hides" the form data away from the user and doesn't clutter up the URL in the address bar.

Note that GET and POST methods are equally (in)secure.

As easily as a user can monkey with GET data in a URL, the same thing can be done with POST data. You should always assume that the user can submit whatever form and form data that they want to, and process the data accordingly. Don't trust user input, whether it's from GET or from POST!

Post data is accessed with the $_POST array in PHP.

   echo("First name: " . $_POST['firstname'] . "
\n"
);
   echo("Last name: " . $_POST['lastname'] . "
\n"
);
?>
<form action="myform5.php" method="post">
   <p>First name: <input type="text" name="firstname" />p>
   <p>Last name: <input type="text" name="firstname" />p>
   <input type="submit" name="submit" value="Submit" />
form>

Using "isset"

You can use the "isset" function on any variable to determine if it has been set or not. You can use this function on the $_POST array to determine if the variable was posted or not. This is often applied to the submit button value, but can be applied to any variable.

For example:

   if(isset($_POST['submit'])
   {
      echo("First name: " . $_POST['firstname'] . "
\n"
);
      echo("Last name: " . $_POST['lastname'] . "
\n"
);
   }
?>
<form action="myform5.php" method="post">
   <p>First name: <input type="text" name="firstname" />p>
   <p>Last name: <input type="text" name="firstname" />p>
   <input type="submit" name="submit" value="Submit" />
form>

The above code will only display the submitted values if the submit button was clicked.

Can I use both GET and POST in the same page?

GET and POST occupy different spaces in the server's memory, so both can be accessed on the same page if you want. One use might be to display different messages on a form depending on what's in the query string.

https://mysite/myform5.php?lang=english

   if(isset($_POST['submit']) {
      if($_GET['lang'] == "english") {
         echo("First name: " . $_POST['firstname'] . "
\n"
);
         echo("Last name: " . $_POST['lastname'] . "
\n"
);
      } else if($_GET['lang'] == "spanish") {
         echo("Nombre: " . $_POST['firstname'] . "
\n"
);
         echo("Apellido: " . $_POST['lastname'] . "
\n"
);
   }
?>
<form method="post">
   <p>First name: <input type="text" name="firstname" />p>
   <p>Last name: <input type="text" name="firstname" />p>
   <input type="submit" name="submit" value="Submit" />
form>

Instead of using GET and POST arrays, you can also use the $_REQUESTarray, which will contain the combined contents of the data. If GET and POST variables have the same name, POST will take priority. It's recommended not to do this unless you really have to, because it can be confusing, and it's best to be clear about where an input is coming from.

One more thing to notice: the "action" on the form is now missing. Technically, this is not valid HTML. However, by not putting in an action, browsers will assume that the form is submitting to itself. This is important because it will also preserve the querystring when the form is submitted (the ?lang=english part). You can use server variables like $_SERVER['PHP_SELF']and $_SERVER['QUERY_STRING']to build an action value.