Certified PHP Developer Learning Resources Installation


Steps to Setting Up PHP 5

  1. Download PHP 5

    Before you begin, get a copy of PHP 5 from the PHP download page. In particular, download the VC6 thread-safe zip package from the "Windows Binaries" section — that is, don't get the installer. For example, select the package labelled "PHP 5.2.5 zip package" if 5.2.5 is the current version.

    [Update: note that I have not tested the procedure below with any of the PHP 5.3 versions, only with 5.2.5, which was the latest version at the time I originally wrote this. In theory, the procedure should work with later 5.2 versions as well. I'm not sure about 5.3 though. A version jump from 5.2 to 5.3 usually means bigger changes than simple bug fixes. If you want to be sure the procedure below will work, just get the latest of the 5.2 series.]

  2. Install PHP 5

    Create a folder on your hard disk for PHP. I suggest "c:\php" although you can use other names if you wish. Personally though, I prefer to avoid names with spaces in it, like "c:\Program Files\php" to avoid potential problems with programs that cannot handle such things. I will assume that you used c:\php in this tutorial.

    Extract all the files from the zip package into that folder. To do that simply double-click the zip file to open it, and drag all the files and folders to c:\php.

  3. Upgraders: Remove the Old PHP.INI File from Your Windows Directory

    If you are upgrading to PHP 5 from an older version, go to your windows directory, typically c:\windows, and delete any php.ini file that you have previously placed there.

  4. Configuring PHP

    Go to the c:\php folder and make a copy of the file "php.ini-recommended". Name the new file "php.ini". That is, you should now have a file "c:\php\php.ini", identical in content with "c:\php\php.ini-recommended".

    Note: if you are using Apache 1, you should either move the php.ini file to your windows directory, "C:\Windows" on most systems, or configure your PATH environment variable to include "c:\php". If you don't know how to do the latter, just move the php.ini file to the "c:\windows" folder. You do not have to do this if you are using Apache 2, since we will include a directive later in the Apache 2 configuration file to specify the location of the php.ini file.

    Use an ASCII text editor (such as Notepad, which can be found in the Accessories folder of your Start menu) to open "php.ini". You may need to make the following changes to the file, depending on your requirements:

    1. Enable Short Open Tags

      Search for the line that reads:

      short_open_tag = Off

      If short_open_tag is set to "off", tags like "commercial web hosts that support PHP have no issues with your scripts using "

      short_open_tag = On
    2. Magic Quotes

      By default, input data is not escaped with backslashes. That is, if your visitors enter an inverted comma (single quote) into your web form, the script will receive that unadorned inverted comma (single quote). This is for the most part desirable unless you have special requirements. If you want your input data to have the backslash ("\") prefix, such as, for example, to mimic your web host's settings, search for the following:

      magic_quotes_gpc = Off

      and replace it with:

      magic_quotes_gpc = On

      Do not do this unless your web host has this setting as well. Even with the setting of "Off", you can still use the addslashes() function in PHP to add the slashes for the specific pieces of data that need them.

    3. Register Globals

      A number of older scripts assume that all data sent by a form will automatically have a PHP variable of the same name. For example, if your form has an input field with a name of "something", older PHP scripts assume that the PHP processor will automatically create a variable called $something that contains the value set in that field.

      If you are running such scripts, you will need to look for the following field:

      register_globals = Off

      and change it to the following:

      register_globals = On

      WARNING: Do NOT do this unless you have third party scripts that need it. When writing new scripts, it's best to always code with the assumption that the register_globals item is set to "Off".

    4. Display Errors

      On a "live" website, you typically want errors in your script to be silently logged to a PHP error file. On your own local machine, however, while you are testing and debugging a PHP script, it is probably more convenient to have error messages sent to the browser window when they appear. This way, you won't miss errors if you forget to check the error log file.

      If you want PHP to display error messages in your browser window, look for the following:

      display_errors = Off

      And change it to:

      display_errors = On

      This value should always be set to "Off" for a "live" website.

    5. Session Path

      If your script uses sessions, look for the following line:

      ;session.save_path = "/tmp"

      The session.save_pathsets the folder where PHP saves its session files. Since "/tmp" does not exist on Windows, you will need to set it to a directory that does. One way is to create a folder called (say) "c:\tmp" (the way you created c:\php earlier), and point this setting to that folder. If you do that, change the line to the following:

      session.save_path = "c:\tmp"

      Notice that in addition to changing the path, I also removed the semi-colon (";") prefix from the line.

      Alternatively, you can find out the current TEMP folder on your computer and use that. Or create a "tmp" folder in your PHP directory, like "c:\php\tmp" and set the configuration file accordingly. The possibilities are endless. If you can't decide, just create "c:\tmp" and do as I said above.

    6. SMTP Server

      If your script uses the mail() function, and you want the function to successfully send mail on your local machine, look for the following section:

      [mail function]
      ; For Win32 only.
      SMTP = localhost
      smtp_port = 25

      ; For Win32 only.
      ;sendmail_from = [email protected]

      Change it to point to your SMTP server and email account. For example, if your SMTP server is "mail.example.com" and your email address is "[email protected]", change the code to:

      [mail function]
      SMTP = mail.example.com
      smtp_port = 25
      sendmail_from = [email protected]

      Note that after you do this, when your script tries to use the mail() function, you will need to be connected to your ISP for the function to succeed. If you do not modify the above lines and attempt to use mail() in your script, the function will return a fail code, and display (or log) the error (depending on how you configure php.ini to handle errors).

      (Note that in Apache 1.x, the smtp_port line may not be present. If so, don't include it.)

How to Configure Apache for PHP 5

There are two ways to set up Apache to use PHP: the first is to configure it to load the PHP interpreter as an Apache module. The second is to configure it to run the interpreter as a CGI binary. I will supply information for how you can accomplish both, but you should only implement one of these methods. Choose the module method if your web host also installed PHP as an Apache module, and use the CGI method if they have implemented it to run as a CGI binary.

  1. Running PHP 5 as an Apache Module

    To configure Apache to load PHP as a module to parse your PHP scripts, use an ASCII text editor to open the Apache configuration file, "httpsd.conf". If you use Apache 1.x, the file is found in "c:\Program Files\Apache Group\Apache\conf\". Apache 2.0.x users can find it in "C:\Program Files\Apache Group\Apache2\conf\" while Apache 2.2.x users can find it in "C:\Program Files\Apache Software Foundation\Apache2.2\conf\". Basically, it's in the "conf" folder of wherever you installed Apache.

    Search for the section of the file that has a series of "LoadModule" statements. Statements prefixed by the hash "#" sign are regarded as having been commented out.

    If you are using Apache 1.x, add the following line after all the LoadModule statements:

    LoadModule php5_module "c:/php/php5apache.dll"

    If you are using Apache 2.0.x, add the following line after all the LoadModule statements:

    LoadModule php5_module "c:/php/php5apache2.dll"

    If you are using Apache 2.2.x, add the following line instead:

    LoadModule php5_module "c:/php/php5apache2_2.dll"

    Note carefully the use of the forward slash character ("/") instead of the traditional Windows backslash ("\"). This is not a typographical error.

    If you are using Apache 1.x, search for the series of "AddModule" statements, and add the following line after all of them. You do not have to do this in any of the Apache 2 series of web servers.

    AddModule mod_php5.c

    Next, search for "AddType" in the file, and add the following line after the last "AddType" statement. Do this no matter which version of Apache you are using. For Apache 2.2.x, you can find the "AddType" lines in the section. Add the line just before the closing for that section.

    AddType application/x-httpsd-php .php

    If you need to support other file types, like ".phtml", simply add them to the list, like this:

    AddType application/x-httpsd-php .phtml

    Finally, for those using one of the Apache 2 versions, you will need to indicate the location of your PHP ini file. Add the following line to the end of your httpsd.conf file.

    PHPIniDir "c:/php"

    Of course if you used a different directory for your PHP installation, you will need to change "c:/php" to that path. Remember to use the forward slash ("/") here again.

    If you are using Apache 1, you will have already placed your php.ini file in either the Windows directory or somewhere in your PATH, so PHP should be able to find it by itself. You can of course do the same if you are using Apache 2, but I find modifying the Apache configuration file a better solution than cluttering your c:\windows directory or your PATH variable.

  2. Running PHP 5 as a CGI Binary

    If you have configured PHP 5 to run as an Apache module, skip forward to the next section. This section is for those who want to configure PHP to run as a CGI binary.

    The procedure is the same whether you are using the Apache 1.x series or one of the 2.x series.

    Search for the portion of your Apache configuration file which has the ScriptAlias section. Add the line from the box below immediately after the ScriptAlias line for "cgi-bin". If you use Apache 2.2.x, make sure that the line goes before the closing for that section.

    Note that if you installed PHP elsewhere, such as "c:\Program Files\php\", you should substitute the appropriate path in place of "c:/php/" (for example, "c:/Program Files/php/"). Observe carefully that I used forward slashes ("/") instead of the usual Windows backslashes ("\") below. You will need to do the same.

    ScriptAlias /php/ "c:/php/"

    Apache needs to be configured for the PHP MIME type. Search for the "AddType" comment block explaining its use, and add the AddType line in the box below after it. For Apache 2.2.x, you can find the AddType lines in the section. Add the following line just before the closing for that section.

    AddType application/x-httpsd-php .php

    As in the case of running PHP as an Apache module, you can add whatever extensions you want Apache to recognise as PHP scripts, such as:

    AddType application/x-httpsd-php .phtml

    Next, you will need to tell the server to execute the PHP executable each time it encounters a PHP script. Add the following somewhere in the file, such as after the comment block explaining "Action". If you use Apache 2.2.x, you can simply add it immediately after your "AddType" statement above; there's no "Action" comment block in Apache 2.2.x.

    Action application/x-httpsd-php "/php/php-cgi.exe"

    Note: the "/php/" portion will be recognised as a ScriptAlias, a sort of macro which will be expanded to "c:/php/" (or "c:/Program Files/php/" if you installed PHP there) by Apache. In other words, don't put "c:/php/php.exe" or "c:/Program Files/php/php.exe" in that directive, put "/php/php-cgi.exe".

    If you are using Apache 2.2.x, look for the following section in the httpsd.conf file:

    AllowOverride None
    Options None
    Order allow,deny
    Allow from all

    Add the following lines immediately after the section you just found.

    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
  3. Configuring the Default Index Page

    This section applies to all users, whether you are using PHP as a module or as a CGI binary.

    If you create a file index.php, and want Apache to load it as the directory index page for your website, you will have to add another line to the "httpsd.conf" file. To do this, look for the line in the file that begins with "DirectoryIndex" and add "index.php" to the list of files on that line. For example, if the line used to be:

    DirectoryIndex index.html

    change it to:

    DirectoryIndex index.php index.html

    The next time you access your web server with just a directory name, like "localhost" or "localhost/directory/", Apache will send whatever your index.php script outputs, or if index.php is not available, the contents of index.html.

Restart the Apache Web Server

Restart your Apache server. This is needed because Apache needs to read the new configuration directives for PHP that you have placed into the httpsd.conf file. The Apache 2.2 server can be restarted by doubleclicking the Apache Service Monitor system tray icon, and when the window appears, clicking the "Restart" button.

 For Support