{"id":108581,"date":"2021-02-16T13:35:15","date_gmt":"2021-02-16T08:05:15","guid":{"rendered":"https:\/\/www.vskills.in\/certification\/tutorial\/?page_id=108581"},"modified":"2024-04-12T14:30:04","modified_gmt":"2024-04-12T09:00:04","slug":"lettering-scales","status":"publish","type":"page","link":"https:\/\/www.vskills.in\/certification\/tutorial\/lettering-scales\/","title":{"rendered":"Lettering & Scales"},"content":{"rendered":"\n

The purpose of scales is to allow an engineer, architect, technician or contractor to determine scaled measurements from drawings or maps very quickly and easily. Drawings and maps are drawn to different scales such as<\/p>\n\n\n\n

1\u201d= 100\u2019, 1\u201d=1\u2019-0\u201dor 1:2 (half size)<\/p>\n\n\n\n

The scale ratio of a model represents the proportional ratio of a linear dimension of the model to the same feature of the original. Examples include a 3-dimensional scale model of a building or the scale drawings of the elevations or plans of a building. In such cases the scale is dimensionless and exact throughout the model or drawing.<\/p>\n\n\n\n

The scale can be expressed in four ways: in words (a lexical scale), as a ratio, as a fraction and as a graphical (bar) scale. Thus on an architect’s drawing one might read<\/p>\n\n\n\n

‘one centimetre to one metre’    or    1:100   or    1\/100<\/p>\n\n\n\n

and a bar scale would also normally appear on the drawing.<\/p>\n\n\n\n

General Representation<\/p>\n\n\n\n

In general a representation may involve more than one scale at the same time. For example, a drawing showing a new road in elevation might use different horizontal and vertical scales. An elevation of a bridge might be annotated with arrows with a length proportional to a force loading, as in 1 cm to 1000 newtons: this is an example of a dimensional scale. A weather map at some scale may be annotated with wind arrows at a dimensional scale of 1 cm to 20 mph.<\/p>\n\n\n\n

Map scales require careful discussion. A town plan may be constructed as an exact scale drawing, but for larger areas a map projection is necessary and no projection can represent the Earth’s surface at a uniform scale. In general the scale of a projection depends on position and direction. The variation of scale may be considerable in small scale maps which may cover the globe. In large scale maps of small areas the variation of scale may be insignificant for most purposes but it is always present. The scale of a map projection must be interpreted as a nominal scale. (The usage large and small in relation to map scales relates to their expressions as fractions. The fraction 1\/10,000 used for a local map is much larger than 1\/100,000,000 used for a global map. There is no fixed dividing line between small and large scales.)<\/p>\n\n\n\n

Types of scale<\/p>\n\n\n\n

Civil engineering scale<\/p>\n\n\n\n

Full Divided Scale<\/p>\n\n\n\n

1\u201dis divided into equal decimal units of10, 20, 30, 40, 50, 60 and 80 divisions. For example, 1\u201d= 100\u2019is a typical scale used for Civil Engineering Drawings. This means that 1\u201don the drawing represents 100\u2019in the real world.<\/p>\n\n\n\n

Civil Engineers typically design large things such as, bridges, roads, buildings, shopping centers etc. Therefore typical scales used include:1\u201d= 100\u2019for plan views of highway designs and 1\u201d= 5\u2019vertical and 1\u201d=100\u2019horizontal for profile views. Section views are typically 1\u201d= 5\u2019vertical and 1\u201d= 10\u2019horizontal.<\/p>\n\n\n\n

Architect’s scale<\/p>\n\n\n\n

Architects are involved in large scale projects as well as smaller scale projects. They use a wide range of different scales for their drawings. Many Structural Engineering detail drawings are read using the Architect\u2019s scale. Achitect\u2019s scale always reads X\u201d= 1\u2019-0\u201dFor example, \u00bd\u201d= 1\u2019-0\u201dor 3\u201d= 1\u2019-0\u201d.<\/p>\n\n\n\n

Common metric scales<\/p>\n\n\n\n